Smooth and Volume Shampoo 20230128BA01

Procedure: 1. Add part A into the vessel and heat to 70-75℃ with stirring until the solid dissolved. 2. Cool down to 40℃, add part B into the vessel with stirring until uniform. 3. Add Pre-mixed part C into the vessel with stirring until uniform, and then add part D. 4. Add part E into the vessel with stirring until uniform. 5. Testing and packing.

Silk Protein Moisturizing Dandruff Shampoo 20240826BA02

Procedure: 1. Add part A into the vessel and heat to 70-75℃ with stirring until the solid dissolved. And then add part B into the vessel with stirring until uniform. 2. Add part C into the vessel with stirring until uniform. And then cool down to 45-50℃, add pre-mixed part D into the vessel with stirring until uniform. 3. Cool down to 40-45℃, add part E into the vessel with stirring until uniform. 4. Testing and packing.

Selenium Sulfide Anti-Dandruff Shampoo 20251115BA01

Procedure: 1. Add part A into the vessel with homogenizing until uniform. Then add part B into the vessel with stirring until uniform. 2. Add part C into the vessel and heat to 80-83℃ with stirring until uniform and keep the temperature for 15-20 mins. And then cool down to 60-65℃, add part D into the vessel with homogenizing until uniform and keep the temperature for 20 mins. 3. Cool down to 50-55℃, add part E into the vessel with stirring until uniform. 4. Cool down to 45-50℃, add pre-mixed part F into the vessel with homogenizing and stirring until uniform. 5. Cool down to 40-45℃, add part G and part H into the vessel with stirring until uniform. 6. Testing and packing.

Satiny Poreless Make-up Primer 20240630BA01

Procedure: 1. Add part A into the vessel with stirring and homogenizing until uniform. 2. Add part B into the vessel with stirring until uniform. 3. Add part C into the vessel with stirring until uniform. 4. Testing and packing.

Rose Extract Toner 20240515BA01

Procedure: 1.Add part A into the vessel with stirring and homogenizing until uniform. 2. Add part B into the vessel with stirring until uniform. 3. Testing and packing.

Radiant Glow Foundation 20250610BA01

Procedure: 1. Mix part A evenly, and pre-grind them with a high-speed powder homogenizer for 5 to 8 minutes until the powder is fine and evenly dispersed. 2. Add part B into part A with stirring until uniform and homogenized for 3-5 min and then add part C into the vessel and heat to 70-75℃, homogenize for 2-3 min and keep the temperature for 15 mins. 3. Add part D into a vessel and heat to 70-75 ℃ with stirring until the solid dissolved, then add part D into oil phase with homogenizing. And the liquid level of the water phase must not be higher than that of the emulsion, and the operation should be completed within 15-20 minutes. 4. After the part D are completely added, continue stirring for emulsification for 10 minutes. First, perform low-speed homogenization for 2-3 minutes, then high-speed homogenization for 3-5 minutes. After that, stir to cool down to 38-40 ℃, add the part E, and mix and stir for 8-10 minutes. 5. Testing and packing.

Pipe Cleaner 20250618BA01

Procedure: 1. Dissolve A1, A2, A3 and A4 sequentially in water until well-mixed. 2. Add part B into the vessel with stirring until uniform. 3. Add part C into the vessel with stirring until uniform. 4. Testing and packing.

Oil Control & Volumizing Hair Powder 20240827BA02

Procedure: 1. Add part A into the vessel and mix well. 2. Testing and packing.

Oil Control & Volumizing Hair Gel 20240827BA01

Procedure: 1. Add part A into the vessel with stirring and homogenizing until uniform. 2. Add part B into the vessel with stirring until uniform. 3. Add part C into the vessel with stirring until uniform. 4. Testing and packing.
< 123456 > proceed page

Get ln Touch Today

To request a quote or find a local distributor, please fill out the form below. If you cannot find the product you need.
Please feel free to contact us and we will reply within 1 hour.

Submit